VS Dave Winchester Mini Quad 1.5lb PP Bodyboard VS Bodyboards

The Versus Project introduces the Winny X4 MiniQuad, the Winchester curve is fitted with the new X4 MiniQuad perfect for slicing off the bottom and dicing the open face.

Board Performance

—–

• Board Technology
• Board Dimensions

• Core – 1.5lb Polypro
  Stringer – 1 x CFT Stringer
  Rails – 55/45 Double Rails
  Channels – MiniQuad Concave
  Slick – Dupont® Surlyn™
  Deck – WaveCushion 8lb PE Deck Skin with NEW Q12 backing
  Tail – Clipped Crescent
  Additional Features – MESH, CNC Shaped, XFL Inner Rails, Nose & Tail Guards, Bull Grip Nose Bulbs.
  Manufacturing Country – Indonesia

  Understanding this bodyboard’s technology

  	1.5lb Kinetic PP (Indonesia)
  	Carbon Fibre/ CFT Stringer Lightweight filament wound carbon composite rod offering rigidity and durability.
  	55/45 Rails This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
  	MiniQuad Concave The X4 MiniQuad takes the key design factors of our groundbreaking full-length QuadConcave and shrinks it down, focusing on the back half of the board. Starting below the wide-point, the X4 essentially splits the hull in two, combining the glide and flow of a flat bottom with the drive and directional control of the QuadConcave.  The X4 MiniQuad is designed to excel in small to medium size surf and for quicker transitions closer to the pocket of the wave.
  	DuPont Surlyn Slick Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
  	Wavecushion 8lb NXLPE (Indo) Decking Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
  Q12	Q12 – Higher density crosslinked PP foam backing layer delivers more resilient nose and tail seam fusion and increases board strength.
  	Clipped Crescent Tail The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
  	Mesh Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
  	Nose Bulbs Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
  	CNC Shaping Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
  	Manufacturing Country: Indonesia/ Broady The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.

• 

  Bodyboard Size	Nose	Wide Point	NTWP	Tail	Finished Thickness
  41″	11 7/8″	20 5/8″	18 3/4″	17 1/2″	52mm
  41.5″	12	20 7/8″	19″	17 3/4″	52mm
  42″	12 1/8″	21 1/8″	19 1/4″	17 7/8″	53mm
  42.5″	12 1/4″	21 3/8″	19 1/2″	18 1/8″	54mm
  43″	12 3/8″	21 5/8″	19 3/4″	18 3/8″	55mm